TREATMENT OF BATTERY IF VEHICLE TAKEN OUT OF SERVICE - AR54.10-P-0006MCC
MODEL 451.3/4
REMOVE/INSTALL 12 VOLT SOCKET - AR54.10-P-1000MCC
MODEL 451.3 /3
bracket (4) (6)
6
Detach vent hose (5) from
battery (G1)
7 Remove battery (G1)
If the battery (G1) is replaced, the
defective battery (G1) must be disposed of
correctly.
See: v
Dispose of battery
OS54.10-P-
0001-01Z
8 Install in the reverse order
Risk of explosion caused by
oxyhydrogen gas. Risk of
poisoning and caustic burns
caused by swallowing battery acid.
Risk of injury caused by burns to
skin and eyes from battery acid or
when handling damaged lead-acid
batteries
No fire, sparks, open
flames or smoking. Wear
acid-resistant gloves,
clothing and glasses. Only
pour battery acid into
suitable and appropriately
marked containers.
AS54.10-Z-0001-01A
Notes on battery AH54.10-P-0001-01A
1 Check battery condition, charge
battery if necessary
On no account leave
battery in discharged state
otherwise sulfate deposits
will form on the plates.
Plates with sulfate deposits
indicate initial damage to
the battery and result in
premature failure.
AR54.10-P-1129MCC
2 Disconnect battery ground line
This prevents any
battery discharge through
closed-circuit accessories
(e.g. clock).
AR54.10-P-0003MCC
3 Charge battery Every 4 weeks.
On no account leave
battery in discharged state
otherwise sulfate deposits
will form on the plates.
Plates with sulfate deposits
indicate initial damage to
the battery and result in
premature failure.
AR54.10-P-1130MCC
2010 Smart Fortwo Passion
2009 ACCESSORIES & BODY, CAB Electrical System, Equipment & Instructions - Fortwo (Cabrio)
15 октября 2019 г. 19:12:10 Page 10 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
Need help?
General
