REPLACE SAM FUSES - AR54.15-P-2001MCC
MODEL 451.3/4
Fig. 20: Identifying Bolts, Standard Fuses, SAM Control Unit, Mini And Maxi Fuses
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
DISCONNECTING AND CONNECTING ELECTRICAL CABLES FROM BATTERY - AR54.18-P-
0002MCC
MODEL 451.3/4
2 Guide the wiring harness of the soft top (2) out of the body opening and
expose
3 Push back the foam casing (3) on the open soft top relay (K66/1) or on the
close soft top relay (K66/2)
4 Detach open soft top relay (K66/1) or close soft top relay (K66/2)
5 Install in the reverse order
1 Turn off ignition
2 Adjust left seat to the rear
Replace standard fuses (2) or mini fuses (3)
3 Pull out damaged standard fuse (2) or mini fuse (3) and replace
Replace maxi fuses (4)
4 Unclip SAM control unit (N10/10) in the rear area (arrow) and fold down forwards
5 Unscrew bolts (1) and carefully lower SAM control unit (N10/10) downwards until the maxi
fuses (4) are accessible
6 Remove damaged maxi fuse (4) and replace
7 Position SAM control unit (N10/10) on crossmember under instrument panel and fasten in
place using the bolts (1)
8 Clip in SAM control unit (N10/10) in correct area (arrow)
2010 Smart Fortwo Passion
2009 ACCESSORIES & BODY, CAB Electrical System, Equipment & Instructions - Fortwo (Cabrio)
15 октября 2019 г. 19:12:10 Page 25 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
Need help?
General
