EasyManua.ls Logo

SMART GT02A - Installation Types and Placement

SMART GT02A
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
kinds of installation: covert and non covert.
If you need the covert installation, please refer installation to an auto
electrical contractor.
Note:
1) To prevent theft of the GT02A,the device should be installed as
covertly as possible.
2) Avoid placing the GT02A close to higher power electrical devices,
such as reversing radar, anti-theft device or other vehicle
communication equipment.
3) The GT02A should be fixed into position with cable ties or wide
double-side tape.
4)Your device has built-in GSM antenna and GPS antenna. During
installation, please make sure the receiving side face is up, with no metal
object above the device to interfere with GPS reception. The following
places are suggested for installation:
- Under the dash board below the front windshield;