Need help?Do you have a question about the SMART GT02A and is the answer not in the manual?
Locate current position using GPRS/SMS communication methods.
Details about the GPS tracking platform for device monitoring.
Set device to track by time interval using GPRS.
Instructions for changing the device's password via SMS.
Methods for real-time location tracking using SMS commands.
Indicates the status of the GPS signal: searching, fixed, or no fix.
Indicates the status of the GSM connection: initializing, connected, or no signal.
Indicates the power status: on, not working properly, or off.
Steps for preparing the device and checking accessories before installation.
Procedure for testing and installing the GSM SIM card into the device.
Guidance on choosing an appropriate location and securing the device.
Discusses covert/non-covert installation and suggested placement for GPS reception.
Details on standard voltage, positive/negative wire identification, and grounding.
Procedure for connecting the power cord after installation.
Information on fuse types for short-circuit protection in covert and non-covert installations.
Troubleshooting steps for poor GPS signal reception.
Troubleshooting steps for poor GSM signal reception.
Checks for red LED not working, fuse issues, and LED behavior on power-up.
Steps to diagnose why the device appears offline on the tracking platform.
SMS commands for changing and recovering the device password.
SMS commands to set server parameters, including IP/DNS mode.
SMS commands to configure APN settings for GPRS connection.
SMS commands to query the device's current GPS position and Google Maps URL.
SMS commands to set the time interval for data uploads.
SMS commands to set the device's time zone.
SMS command to revert the device to factory settings.
To Next Page
General