3.3.Add locks
3.3.1 Add locks By Bluetooth
TTLock supports multiple types of lock devices. The lock needs to be added by
the app after entering the add mode. Generally, a lock that has not been added, as
long as the lock keyboard is touched, it will enter the add mode. The default
password is 123456 if not added by the phone
3.3.2 Connect WiFi
There are two ways to connect the lock with your WiFi.
1.
When you connect to the lock through the APP, you can
choose to connect on 2.4G WIFI what you need.
2.
Click on the " " as shown in figure, you can set up the
WIFI setting → Select " WIFI " → Click on the WIFI Name, chose the
2.4Gz WiFi what you need. （If you need to change your WiFi, this
step will help you.）
Turn off the “Power saving mode”：
Keep WiFi connected at all
times Remote unlocking can be controlled and received messages will
be reported
Turn on the“Power saving mode”：The WiFi is connected only
when a message is reported. The lock cannot be opened remotely and
only the reported message can be received
To Next Page
Loading...