SMART SBID-MX075-V3 - Adjusting the Volume; Changing a Pens Default Color, Thickness, and Other Properties; Erasing Digital Ink

Chapter 2
Using basic features
smarttech.com/kb/171554 24
Changing a pen’s default color, thickness, and other properties
You can change a pen’s color, thickness, and other properties temporarily using the SMARTInk dynamic
(floating) toolbar when you’re viewing a connected computer’s input.
To change the pen’s default color, thickness, and other properties, see Changing pen, eraser, and button
settings.
Erasing digital ink
You can erase digital ink from the screen using your palm or fist:
To erase digital ink
Move your fist or palm over the digital ink you want to erase.
Adjusting the volume
Use the buttons on the front control panel or the remote control to increase, decrease, or mute the display’s
volume.
NOTE
See There’s no sound or there’s a problem with the sound on page45 if you encounter issues with the
display’s sound.
To turn the volume up or down
Press the Volume Up or Volume Down button on the front control panel or the remote control.
NOTES
l
Press and hold the Volume Down button to rapidly decrease the volume.
l
When you press the Volume Up or Volume Down button on the front control panel or the
remote control, you can use the on-screen slider to adjust the volume.
To mute the volume
Press the remote control’s Mute button.