Chapter 4
Connecting computers and other devices
smarttech.com/kb/171554 40
Connecting a SMART OPS PC module
If your organization has purchased a SMART OPS PC module, you or your
organization’s installers can install the OPS PC module in the display’s accessory
slot following the OPS PC module’s installation instructions
(smarttech.com/kb/171544). You can then view the OPS PC module’s input on the
display.
For more information about SMART OPS PC modules, see the SMART OPS PC
modules user guide (smarttech.com/kb/171747).
Connecting USB drives, peripherals, and other
devices
The display includes the following USB Type A receptacles. You can connect USB drives, peripherals (such
as keyboards), and other devices to these connectors and use the devices with the iQ experience,
connected computers, and devices installed in the accessory slot (such as the SMART OPS PC module).
SMART Board MX (V3) series SMART Board MX (V2-C) series
To Next Page
Loading...
