SMART SENDO - Maintenance; Technical Data

Maintenance
Do not open the device. It uses delicate electrical components and an intricate air
unit that could be damaged. If you cannot x the problem using the troubleshoot-
ing instructions, request service at our hot line.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected every 2 years,
to ensure proper functioning and accuracy.
DO NOT TRY TO DISSASEMBLE AND FIX THE UNIT BY YOURSELF!
Note: Specications are subject to change without prior notice.
Technical Data
Measurement method
Measurement range
Measurement accuracy
Power supply
Classication
Clinical test
EMC
Memory
Operating condition
Storage condition
Dimensions
Weight
Oscillometric measurement
Pressure: 20 - 280 mmHg
Pulse: 40 - 180 beats/minute
Pressure: ±3 mmHg or 2%, whichever is greater
Pulse: ±5%
2 x 1.5V batteries (LR3 or AAA)
Type BF
According to ANSI / AAMI SP-10 1987
IEC 60601-1-2: 2001
Last 30 measurements
+10°C to +40°C / 30%RH to 85 %RH
-10°C to +60°C / 30%RH to 95 %RH
Approx. 63 mm (width) x
56 mm (height) x 21 (depth) mm
Approx. 260 g, excluding the batteries
EMC Table information is listed on our website: www.unicoms.com/sendo-emc
11