EasyManua.ls Logo

SmartBidet SB-3000 - Operational & Hose Restrictions; General Usage & Cleaning Advice; CAUTION BEFORE INSTALLATION; Wiring Requirements

SmartBidet SB-3000
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– SAVE THESE INSTRUCTIONS –
2 CAUTION BEFORE INSTALLATION
WIRING REQUIREMENT
THIS PRODUCT MUST BE PLUGGED into a regular voltage grounded GFCI outlet (North America 120Vac). The
rated power consumption is 1400W. In locations where only a standard two-prong outlet is available, it is the
responsibility of the user to install a grounded three-prong outlet. Using a higher voltage is dangerous and may result
in a fire or other accident. This product is not responsible for damage resulting from the use of it on other than
specified voltage, or operating it without proper grounding.
WARNING
This Product must be on a separate circuit. No other appliance should share the circuit with this product. Sharing a
circuit could cause the branch circuit fuse to blow or the circuit breaker to trip. Continuous usage under these
conditions could result in fire or property damage.
GROUND INSTRUCTIONS
(1) This product has a three-prong grounding plug, which must be plugged into an outlet that is properly installed and
grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. If repair or replacement of the cord or plug is necessary, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or
without yellow stripes is the grounding wire. Check with a qualified electrician or service person if the grounding
instructions are not completely understood, or if in doubt as to whether the product is properly grounded.