(2) This product is for use on a nominal 120Vac circuit, and has a grounding plug that looks like the plug illustrated in
sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used
to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified
electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by the
screw.
This appliance has to be earthed.
DANGER
IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK. Electric wiring has to be done in
accordance with all local codes, or in the absence of local codes, with the National Electrical Codes.
The use of an extension cord is not recommended or advised. If it is necessary to use an extension cord, use only a
three-prong extension cord (one to one), and a three slot built-in GFCI receptacle that will accept the plug on this
product. The marked rating of the extension cord should be equal to or greater than the electrical rating of the unit
(10amp). Consult a qualified electrician or service person if you are not sure whether the unit is properly grounded.
3 Identification
1 MAIN UNIT
To Next Page
Loading...