9
Configure eye gaze in Grid 3
Once positioned, the camera can be configured
and calibrated from Grid 3. To do this:
1. Open Grid 3
2. Click Settings
3. Navigate to Access
4. Select eye gaze and you will be presented
with a range of configuration options. Under
the camera option, choose the model
contained in the Eye gaze unit.
5. Tap back and you can now configure
Activation, Calibration and Computer
Control options. You will also be able to see
the Positioning guide that can help you find
the optimal position for your Grid Pad.
6. The first time you use the camera, it is best to
calibrate. This will improve the accuracy of
the camera and help identify any difficult
areas to access. You only have to
calibrate once. However, if you move the
device or change position, you may want to
re-calibrate to suit.
To Next Page
Loading...
