Smartech HGR-1000
USER GUIDE PAGE 12
1. Load the Battery Cartridge into the HGR-1000. Make
sure that the nipple end is inserted rst. See Figure J.
2. Screw in the back portion of the ashlight.
See Figure K. Your ashlight is ready to use!
Figure J.
Figure K.
Warning:
Do Not attempt to charge your HGR-1000 when using
the AAA Battery Cartridge. The batteries provided are not
meant to be recharged and may burst if the charger is
connected causing damage to your ashlight.
If you use rechargeable AAA batteries, charge them with
an external battery charger only. Do not use the built-
in charging system as it is meant to work only with the
Smartech Lithium-Ion battery.
To Next Page
Loading...
