EasyManua.ls Logo

Smartech TECH-5000P - Usb Power

Smartech TECH-5000P
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER’S MANUAL PAGE 13TECH-5000P
3 Slow ash Off No buzzer Lithium battery voltage in
the TECH-5000P Power
Kit is rather low.
4 Slow ash Off No buzzer Have not turned on the
ignition switch within the
regulated time. To resolve
this, you need remove
clamps from vehicle bat-
tery, and connect again.
5 Fast ash Off Fast buzzer Red and black clamps are
connected with each other.
6 Fast ash Off Fast buzzer Reverse connection of
clamps.
7 Off Fast ash No buzzer Engine is started.
8 Off Fast ash No buzzer Vehicle’s battery volt-
age is higher than Jump
Starters.
USB POWER
Connect the USB device to the TECH-5000P Power Bank with the
included multi-tip cable (For Apple® for Apple® products, it’s
better to use the original cable that came with the devise). Press
the Power Button to start USB power, and press Power button
to quit. When disconnected, the TECH-5000P Power Bank will
automatically shut off. The number of times you can recharge a
USB device will vary between devices.
FLASHLIGHT
Press Flashlight button to start ashlight. Press once to switch
lighting modes: Steady On – Strobe – SOS – Off.