Smartech TECH-5000P - Operational Safety for Air Pump; Operational Safety

USER’S MANUAL PAGE 24TECH-5000P
OPERATIONAL SAFETY
1. WARNING: Do not use this product if it is not completely
assembled or if any parts appear to be missing or damaged.
Use of this product that is not properly and completely
assembled or with damaged or missing parts could result in
serious personal injury
2. WARNING: Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do so could
result in objects being thrown into your eyes resulting in
possible serious injury.
3. WARNING: Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use of
attachments or accessories not recommended and can result in
serious personal injury.
4. WARNING: The air pump is not designed for continuous use.
For every ten minutes of air pump use, six minutes of cool down
time are required.
5. WARNING: Since the pressure gauge is not calibrated, and is
therefore not binding for exact values. Tire pressure must be
checked using a reliable measuring device before driving a
vehicle with tires inated with the air pump. Driving a vehicle with
improperly inated tires could result in serious injury.
6. WARNING: Do not leave items to be inated unattended while
air pump is in use. These items can burst and could cause
serious injury.
7. WARNING: The air pump is capable of inating to 150 PSI. To
avoid over ination, carefully follow instructions on items to be
inated. To avoid product damage, never exceed recommended
pressures.