USER’S MANUAL PAGE 23TECH-5000P
20. Inspect tool cords periodically and, if damaged, have repaired
at your nearest Authorized Service Center. Constantly stay
aware of cord location. Following this rule will reduce the risk of
electric shock or re.
21. Risk of bursting. Carefully monitor objects during ination.
22. To reduce the risk of over ination, use a reliable pressure
gauge periodically during ination. The pressure gauge on the
air pump is for reference only and is therefore not binding for
exact values.
23. Never leave the air pump unattended during ination.
24. Allow pump to cool for six minutes after each ten minutes of
continuous use. Never block the inating or deating outlets
while operating.
25. Save these instructions. Refer to them frequently and use
them to instruct others who may use this air pump. If you loan
someone this air pump, loan them these instructions also.
ASSEMBLY
1. WARNING: Do not use this product if it is not completely
assembled or if any parts appear to be missing or damaged.
Use of a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury
2. Protect material lines and air lines from damage or
puncture. Keep hose and power cord away from sharp objects,
chemical spills, oil, solvents, and wet oors.
To Next Page
Loading...