Smarter Coffee User Manual

The set up to my Smarter Coffee - 2nd
Generation failed what do I do?
If the setup to your Smarter Coffee - 2nd Generation was not successful, please read our
setup tips below:
 Please check the WIFI password and name is entered correctly (characters are case
sensitive).
 Please check that the connection light next to the start button is flashing. Once plugged
in, the connection light will flash for 60 seconds. If the connection light is not flashing,
please unplug, wait 10 seconds, then plug back in.
 Once the countdown to BlinkUp begins, place your device FLAT on top of the
connection light until your phone buzzes or beeps (unless your phone is on ‘do not
disturb’ mode, in which case, just wait 20 seconds until you remove your phone from the
connection light).
 As the BlinkUp is light sensitive please try not have any strong, direct light next to the
connection light.
 Ensure the WIFI network you are connecting to is a 2.4ghz signal. If you have a dual-
band network that has is split into 5ghz and 2.4ghz, please ensure your device is
connected to the 2.4ghz signal and has forgotten the 5ghz before you start the setup.
If you are having problems connecting to an Android phone or tablet, please ensure the
following:
1. Screen brightness is not set to Auto.
2. Screen brightness is at maximum.
3. If you have a Samsung phone, Power Saving is off.
WiFi Compatibility
Smarter products are only compatible with WiFi routers emitting 2.4gHz signals.

Smarter Coffee Specifications

General

Connectivity	Wi-Fi
Compatibility	iOS, Android
Grind Settings	Adjustable
Brew Strength	Adjustable
Scheduling	Yes
Type	Drip Coffee Maker
Material	Plastic, Stainless Steel
Power	1000W
Capacity	12 cups
Control	App
Weight	3.5 kg
Voltage	220-240V

Summary

Smarter Coffee Setup Troubleshooting

Initial Setup Tips

Check WiFi password/name, ensure connection light flashes, use phone's BlinkUp feature correctly, and avoid direct light. Ensure 2.4GHz signal.

Android Device Connection Issues

Troubleshoot Android connections by ensuring screen brightness is max, not on Auto, and Power Saving is off for Samsung phones.

WiFi Compatibility Details

Reconnect Smarter Coffee After WiFi Change

Resetting WiFi Connection

Press and hold the beans button until factory reset appears, then unplug for 10 seconds before plugging back in to clear old WiFi details.

Smarter Coffee App Information

Re-setup After Network Deletion

Troubleshooting Blank Router List

Router List Visibility Issues

Refresh the list, ensure location services are on, and check app location permissions if the router list is blank.

Connecting Multiple Devices

Resetting Smarter Coffee WiFi

Connection Light Not Flashing

Connection Light Troubleshooting

If the connection light doesn't flash, unplug the machine from power, wait 10 seconds, then plug it back in.