SmartKitty SELF CLEANING LITTER BOX - Setting Working Time After Cat Use

Confirm the time by pressing OK. ’To’ starts to flash.
By pressing up/down arrows set the fixed time for the end of
standstill.
Press OK. The sleep mode of the litter box is set.
WARNING: If the fixed time FROM=TO, the litter box will not work.
Setting the working time after being used by a cat.
The function used to set the start- up time is determined by the type of grit. The time should be
set according to the grit producer recommendations.
The most frequent time settings
Gravel
The time in which the litter box should be
working.
bentonite
5 minutes
wood
7 minutes
corn
12 minutes
silicone
2 minutes