Smartlink Smartfall-Blue - Troubleshooting

25
Troubleshooting
If the area around the button becomes damaged
please contact your supplier.
LED operation
Event LED/Sounder action Action
Alarm
button
pressed
Red LED on for 2 seconds
and unit beeps rapidly 3
times . If Red LED flashes
battery is low.
If possible,
speak clearly to
the monitoring
centre
Fall
detected
(cancellati
on period)
Green LED flashing and
high/low/high tones being
played every second.
Tap pendant
case 3 times
rapidly to
cancel if help is
not required
Fall alarm
generated
Red LED on for 2 seconds
and 3 rapid alarm tones
played. If Red LED flashes
battery is low.
If possible,
speak clearly to
the monitoring
centre
Error –
problem
detected
Smartfall emits one long
beep and flashes blue for
30 sec. after activation
indicates pendant signal
did not reach the main
alarm unit.
Pendant is out
of radio range
or not
programmed
in. C
ontact your
supplier.