To Next PageTo Next Page
Need help?Do you have a question about the SmartWitness CP2-VZ-LTE and is the answer not in the manual?
General| Camera Type | Dash Cam |
|---|---|
| Video Resolution | 1080p |
| GPS | Yes |
| G-Sensor | Yes |
| Frame Rate | 30 fps |
| Connectivity | 4G LTE, Wi-Fi |
| Storage | MicroSD up to 128GB |
| Lens | Wide angle |
| Operating Temperature | -20°C to 70°C |
Warning about opening the cover and servicing.
Warning about battery replacement and disposal.
Warning about visibility and airbag interference.
Disclaimer regarding malfunction and data loss.
Warning against exposure to rain or moisture.
Tips for better GPS reception in various conditions.
Recommended temperature range for GPS receiver operation.
Time required for the unit to acquire GPS location.
Conditions that can impair GPS signal strength.
Diagrams identifying front and side components of the camera.
Details on power adapter, cable, and their specifications.
Process of the unit booting up and becoming ready to record.
Records continuously while powered on.
Records based on triggers like impact or panic button.
Combines continuous and event recording.
Records GPS and G-sensor data for driving analysis.
Procedure to calibrate the G-sensor for accuracy.
How the super capacitor saves the last file on power loss.
Instructions for formatting the SD card using the software.
Procedure to safely eject the SD card from the device.
Details the states and functions of the Red, Blue, and Green LEDs.
Explains the different beep sounds and their meanings.
Emphasizes the need for qualified professionals for installation.
Provides URL to download installation guides.
Overview of the CP2 configuration tool software.
Minimum specifications for running the configuration tool.
Step-by-step guide to install the software on a PC.
Instructions for removing the software from the PC.
Steps to initialize the SD card using the software.
Explains options like keeping or not copying configuration files.
Settings for camera selection, title, and video type.
Configuration for power, chime, and speed source.
Available resolutions for CH1 and CH2 cameras.
Frame rate options based on camera configuration.
Adjusting picture quality from Standard to Super.
Options for Continuous, Event, Dual, or No Record.
Adjusting time for recording before and after an event.
Settings for parking mode recording and overwriting files.
Options for recording drive data and setting stream password.
Setting shock sensor sensitivity modes (Simple/Custom).
How sensitivity adjusts with vehicle speed.
Choosing camera channels and configuring overspeed alerts.
Setting up system error alerts and external alarm inputs.
Setting Time Zone, GPS sync, and daylight saving.
Automatic formatting of SD card on error.
Fields for Vehicle No and Driver ID.
Settings for cellular connection (Dial No, APN, etc.).
Settings for Wi-Fi connection (SSID, Password).
Note on not having 3G/Wi-Fi switching.
Configuring transmission of tracking, event, and telematics data.
Settings for event images and types of event triggers.
Overview of the PC Viewer software interface.
Minimum PC specifications for the viewer software.
Step-by-step guide to install the PC Viewer software.
Instructions for removing the PC Viewer software.
Configuration options for the PC Viewer software itself.
Customizing graph scales for drive data.
Steps to select and open the SD card in the viewer software.
How to open and play specific MDT files.
Identifies components shown during playback like G-sensor, time, speed.
Describes buttons like Previous, Reverse, Play, Next.
Controls for playback speed, capturing screens, and recording video.
Explains G-sensor, GYRO, Speed, RPM, and Alarm data visualization.
How the route is displayed on the map with GPS data.
How to search events by date, time, and conditions.
How to blur areas in videos for privacy protection.
Steps to save selected frames as JPG images.
Steps to save video clips as MP4 files.
How to print images with subject and comments.
Steps to back up recorded data to a PC.
How to view and play backed-up files.
Details sensor type, angle of view, and video resolution.
Specs for recording, memory, wireless, GPS, G-sensor.
Information on power input, consumption, and size/weight.
Table showing estimated recording times based on resolution and storage.
Steps to prepare the SD card with firmware files.
Instructions for upgrading the CP2 unit's firmware.
Information on how to get technical support.
Details of the product's 2-year warranty terms.
Descriptions of optional camera models SVA033-D and SVA040-D.
Details on optional accessories like Driver ID reader and OBD2 port.
Compliance statements for FCC Part 15 regulations.
Statement regarding RF exposure limits and installation distance.
