118
4. Click OK.
5. In the Criteria of backup available space textbox, enter the value (MB) to
change the allocated disk space for backing up to your storage system.
Otherwise do not change it, the default setting of 10 % is suggested.
6. Enter the password again.
7. Click Apply.
NOTE:
z When the total file size is over the limit, the warning message “The disk space is not
enough” appears.
z The sda is corresponding to sda1, sdb is corresponding to sdb1, and so forth on
the Eject your USB section of the USB Backup page.
To Next Page
Loading...