EasyManua.ls Logo

SMC Networks NAS04 - annexe 3 - Important Notes; Safety Information

Default Icon
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Information
z WARNING: Before connecting to power, set the Voltage Switch on
the rear of your system to the voltage matching your area –
voltage rating 100~120 / 200~240 Vac. Device could be damaged
when the Voltage Switch is at the wrong position.
z Maximum operating ambient temperature 40
o
C degree
Important Notes
z When ejecting the USB device from your NAS system, make sure to
disconnect from the Samba connection first.
z Your SMCNAS04/SMCNAS24 does not support any USB hub connected
to the USB ports.
z When installing hard disk drives to your SMCANS04/SMCNAS24 SMC
suggests using the same vendor and the same size hard disk.