120
3. Via Samba connection in “p2p” folder there is a “torrents” folder, place
torrents file in it.
4. Click Yes to enable the download station.
5. Click Apply.
6. Wait for about 20 seconds, then open a new web browser by
typing: http://your_nas_ip:4080.
NOTE:
z If you do not want to use the default maximum download/upload speed, you can type in
the new value.
z Click Pause/Resume to pause or resume the download, or Delete to remove the
download.
z In the “p2p” folder, there is an “incoming” folder. You can view the complete file after
downloading via Samba connection.
z If your NAS is behind the router, please open TCP port 6882 to enable download station
to speed up downloading.
To Next Page
Loading...