To Next Page

To Previous Page

• SNMP. SNMP (Simple Network Management Protocol) MIB I, MIB II,

IEEE 802.1d, and Private Enterprise MIB are supported.

• UPnP. The SMC2586W-G responds to UPnP discovery messages so

that a Windows XP user can locate the SMC2586W-G in My Network

Places and use a Web browser to configure it.

• Telnet. The SMC2586W-G can be managed by Telnet.

• System log. For system operational status monitoring.

• Local log. System events are logged to the on-board RAM

of the SMC2586W-G and can be viewed using a Web browser.

• Remote log by SNMP trap. Systems events are sent in the

form of SNMP traps to a remote SNMP management server.

• Remote log by BSD Syslog. Systems events are sent in the

form of BSD Syslog (RFC3164) to a remote Syslog server.

•Power over Ethernet. Supplying power to an SMC2586W-G over an

Ethernet cable using optional SMCPWR-INJ3 Power Injector (IEEE 802.3af

compliant). This feature facilitates large-scale wireless LAN deployment.

•Hardware Watchdog Timer. If the firmware gets stuck in an invalid state,

the hardware watchdog timer will detect this situation and restart the

SMC2586W-G. This way, the SMC2586W-G can provide continuous services.

1.4 LED Definitions

There are several LED indicators on the SMC2586W-G. They are defined as

follows:

• ALV: Alive. Blinks when the SMC2586W-G is working normally.

• RF: IEEE 802.11b/g interface activity

• LAN: Ethernet LAN interface activity

• PWR: Power

SMC Networks SMC EliteConnect SMC2586W-G User Manual

Questions and Answers: