EN - 8
DESCRIPTION OF THE APPLIANCE
(Fig. A)
1 Machine body.
2 Coffee bean container lid.
3 Coffee bean container.
4 Water tank cover.
5 Water tank (1,4 l).
6 Grinding selection knob.
7 Grinders protection.
8 Brewing group access door.
9 ON/OFF button.
10 Control panel.
11 Height adjustable coffee dispenser.
12 Coffee grounds container.
13 Internal drip tray.
14 External drip tray with level indicator.
15 Brewing group.
IDENTIFICATION PLATE
The identification plate states the technical
data, serial number, and marking.
The identification plate must never be removed.
BEFORE FIRST USE
(Fig. A)
• Unpack the appliance carefully and remove
all packaging materials.
• Rinse the removable components with
lukewarm water, such as: water tank (5)
covers (2,4), door (8) grounds container
(12) drip trays (13,14) and brewing group
(15).
Before use, check that all
components are integral and have
no cracks.
ASSEMBLY OF COMPONENTS
(Fig. B)
• Place the machine on a flat surface and fix
the drip tray
(14).
• Connect the power supply cable to the
socket on the rear of the machine and the
other end to a power socket
.
DESCRIPTION OF CONTROLS
AND ALARMS (Fig. A-C-D)
ON/OFF button (9)
Pressing the button switches the machine on
or off.
Change dispensing program
button (20)
The product has 8 functions, accessible
through two menus, Primary Menu and
Secondary Menu.
By pressing this button it is possible to change
the dispensing menu from “Primary” and
“Secondary” and vice versa.
Description / Assembly / Controls
To Next Page
Loading...
Need help?
General
