Smeg Lavazza A MODO MIO User Manual (English)

Questions and Answers:

J
Jesse DavisAug 16, 2025
What to do if Smeg Lavazza A MODO MIO Coffee Maker is leaking from the front?
- J
  john43Aug 16, 2025
  If water is leaking from the front of your Smeg Coffee Maker, there are several possible causes. Make sure the spent capsule drawer is correctly inserted. If it's full, empty both the drawer and the drip tray. A capsule might be stuck; try lifting and lowering the capsule loading lever, and if that doesn't work, disconnect the machine and manually remove the capsule. Finally, ensure you are using Lavazza A MODO MIO capsules or compatibles.
J
James WardAug 19, 2025
Why are the buttons on my Smeg Coffee Maker blinking?
- M
  michael44Aug 19, 2025
  If your Smeg Coffee Maker's buttons are showing white lights and blinking fast, it usually means the spent capsule drawer is full. Empty the drawer and then press one of the power on/supply buttons to reset the machine.
B
Brittney RodriguezAug 22, 2025
Why is my Smeg Lavazza A MODO MIO leaking from the back?
- J
  Justin AtkinsonAug 22, 2025
  If water is leaking from the rear of your Smeg Coffee Maker, it's likely due to the tank not being inserted correctly; make sure to insert the tank correctly. Alternatively, the tank might be damaged; check it for leaks separately from the machine.
A
Andrea DodsonAug 25, 2025
Why is the coffee from my Smeg Coffee Maker cold?
- H
  Heather LeeAug 26, 2025
  If the coffee from your Smeg Coffee Maker is cold, it could be due to a couple of reasons. First, the water circuit might be clogged, causing the coffee to pour out in drops; try running the machine's washing cycle. Alternatively, limescale build-up could be the issue, so descale the machine.
N
Nathaniel HernandezAug 28, 2025
Why does coffee flow too fast from Smeg Coffee Maker?
- L
  Laura ReedAug 28, 2025
  If the coffee from your Smeg Coffee Maker flows out too fast without forming a creamy froth, it might be due to using an incompatible capsule. Ensure you are using Lavazza A MODO MIO capsules or compatibles. Also, check if the capsule has already been used; if so, return the lever to the rest position and load a new capsule.
T
Timothy KhanAug 31, 2025
Why does Smeg Lavazza A MODO MIO Coffee Maker pour coffee in drops?
- T
  Taylor WilsonAug 31, 2025
  If the coffee from your Smeg Coffee Maker is pouring out in drops, it could be due to a few reasons. The capsule might be faulty, so try replacing it. Alternatively, the spout or water circuit could be clogged; try cleaning the coffee dispensing spout. Limescale build-up could also be the cause, so descale the machine.
E
Elizabeth PhillipsSep 3, 2025
What to do if loading lever on Smeg Lavazza A MODO MIO Coffee Maker requires excessive effort?
- X
  xmontgomerySep 3, 2025
  If the loading lever on your Smeg Coffee Maker doesn't reach the supply position or requires excessive effort, it could be because the spent capsule drawer is full; try emptying it. Alternatively, a capsule might be fitted incorrectly; lift and lower the capsule loading lever, and if that doesn't work, disconnect the machine and manually remove the capsule.
R
Randy HarperSep 6, 2025
How to fix a Smeg Coffee Maker when the capsule doesn't fall?
- R
  Richard PattonSep 6, 2025
  If the capsule in your Smeg Coffee Maker doesn't fall down to the used capsule collecting tray, it may be stuck. Try lifting and lowering the capsule loading lever. If that doesn't work, disconnect the machine from power and manually remove the capsule.
P
Paul OsborneSep 8, 2025
Why is there steam from Smeg Coffee Maker but no coffee?
- M
  matthewwatkinsSep 9, 2025
  If your Smeg Coffee Maker isn't supplying coffee and steam is coming out of the capsule compartment, it's likely because the loading lever wasn't set to the brewing position. Make sure to set the loading lever to the brewing position.

Smeg Lavazza A MODO MIO Specifications

General

Product type	Capsule coffee machine
Built-in grinder	-
Capacity in cups	1 cups
Coffee input type	Coffee capsule
Coffee maker type	Semi-auto
Appliance placement	Countertop
Water tank capacity	0.9 L
Maximum operating pressure	10 bar
Reservoir for brewed coffee	Cup
Control type	Buttons, Lever
Product color	Cream
Housing material	Plastic, Stainless steel
Removable drip tray	Yes
AC input voltage	220 - 240 V
AC input frequency	50 / 60 Hz
Package depth	447 mm
Package width	238 mm
Package weight	5850 g
Quantity per pack	1 pc(s)
Multi beverage	No