Smeg CMSC45B - Built-In Installation

10
BUILT-IN INSTALLATION
Verify the minimum measurements required for
correct installation of the appliance.
The coffee maker must be installed in a column
and the column must be firmly fixed to the wall
with commercially available brackets.
Important:
• Important: all installation or maintenance
operations must be performed with the ap-
pliance disconnected from the mains electri-
city supply.
• Kitchen furniture in direct contact with the
appliance must be heat resistant (65°C min).
• To guarantee correct ventilation, leave a gap
at the bottom of the cabinet (see measure-
ments in figure).
45 mm
45 mm
45 mm
45 mm
450
850 mm
500 mm
550 mm Min
560 mm
200 cm
2
455 mm
595 mm
22 mm
361 mm
528 mm
372 mm
15 mm
200 cm
2
45 mm
45 mm
45 mm
45 mm