Warning! The appliance must be disconnected from the electrical
current when installation and repair work is being done. To disconnect
the appliance from the current, one of the following conditions must
apply:
-The switchboard fuses / circuit breakers must be disconnected.
-The plug should be removed from the socket. To remove the plug
from the socket do not pull on the electric cable but rather pull out
the plug itself directly.
The manufacturer declines all responsibility for injury or damage caused by failure
to comply with the above regulations or deriving from tampering with even just one
part of the appliance and the use of non-original spare parts.
To Next Page
Loading...
