Smeg DF352CW - Page 16

Installation
16
DRAIN CONNECTION
Insert the
dishwasher’s drain
hose into a drain pipe
having a diameter of
at least 4 cm
, or
alternatively, place it
inside the kitchen sink
using the plastic
support provided,
taking care not to
crush or excessively
bend the hose. It is
important to prevent
the hose from coming
loose and falling.
For this purpose, the plastic support is
equipped with a hole for tying it to the wall or
water tap.
The free end should be positioned at
a height of between 30 and 100 cm,
and should
never be submerged in water. If a horizontal
drain extension hose is used (for a maximum 3
m), the drain hose ca
n be placed at a maximum
height of.
85 cm
from the ground.
Class of protection against moisture: IPX0