What to do if my Smeg DF14SS shows error E6?
If your Smeg Dishwasher displays error code E6, first ensure that the drain hose isn't kinked or crushed. Also, check that the siphon and filter are not blocked. If the issue continues after these checks, contact after-sales service.
What to do if my Smeg DF14SS Dishwasher shows error E5?
If your Smeg Dishwasher displays error E5, verify that the water connections are correctly installed and that the water intake tap is fully open. Also, inspect the filter to ensure it is clean and free from blockages. If the problem continues, contact after-sales service.
What to do if my Smeg Dishwasher displays error E2?
If your Smeg Dishwasher shows error code E2 or E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
What to do if my Smeg Dishwasher displays error E4?
If your Smeg Dishwasher shows error code E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
What to do if my Smeg DF14SS shows error E3?
If your Smeg Dishwasher displays error code E3, try repeating the wash program. If the problem remains after repeating the program, contact after-sales service for further assistance.
Comprehensive safety warnings and precautions for appliance use and installation.
Positioning, stability, and general installation requirements.
Connecting the appliance to the water inlet.
Electrical hook-up, plug requirements, and safety measures.
Instructions for replacing the fuse in the plug for UK users.
Identification and function of buttons and indicator lights on the upper panel.
Explanation of the information display and additional option buttons.
How to select programs, start the dishwasher, and manage cycles.
Guidance on using the water softening system, salt, rinse aid, and detergents.
Guidelines for loading dishes and adjusting the upper basket.
General advice on cleaning outer surfaces, door gaskets, and avoiding abrasive detergents.
Procedures for cleaning the water intake filter, spray arms, and filter unit.
Steps to take when the dishwasher is not used for an extended period.
Common issues and their step-by-step solutions.
Detailed explanations of error codes and system malfunctions.
General| Type | Freestanding |
|---|---|
| Place Settings | 14 |
| Half Load Option | Yes |
| Color | Stainless Steel |
| Delay Start | Yes |
| Drying System | Condenser drying |
To Next Page
