EasyManua.ls Logo

Smeg DF13E2SV - User Manual

Smeg DF13E2SV
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Contents
1
1. Safety and operating instructions __________________________ 2
1. Installation and hook-up _________________________________ 7
2. Description of the controls ______________________________ 10
3. Operating instructions __________________________________ 16
4. Cleaning and maintenance ______________________________ 24
5. Troubleshooting ______________________________________ 38
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need about the right conditions for the proper, safe use of
your dishwasher.
The individual sections are laid out to provide you with a step-by-step
guide to all your appliance's functions; the texts are easy to understand
and are complete with detailed illustrations.
Recommendations are given for the correct use of the baskets, spray
arms, containers, filters, washing programs, and for operating the controls.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
This user-friendly manual will provide answers to all your questions about
use of the dishwasher.
INSTALLATION INSTRUCTIONS: these are intended for the qualified
technician who must carry out the installation, hook-up and testing of the
appliance.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.

Questions and Answers

  • B
    Brett SaundersAug 11, 2025
    Why is my Smeg DF13E2SV Dishwasher not taking in water?
    • J
      James WilliamsAug 11, 2025
      If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
  • S
    Sierra MooreAug 19, 2025
    What to do if my Smeg DF13E2SV has a water pump-out malfunction?
    • K
      Kathleen BrownAug 19, 2025
      If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
  • E
    Elizabeth WatsonAug 26, 2025
    What to do if my Smeg DF13E2SV Dishwasher shows a safety level error?
    • D
      Desiree WilsonAug 26, 2025
      If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
  • J
    James FosterSep 3, 2025
    What to do if my Smeg Dishwasher has water temperature monitoring malfunction?
    • S
      Stanley CunninghamSep 3, 2025
      If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.

Smeg DF13E2SV Specifications

General IconGeneral
Appliance placementFreestanding
Control panel colourSilver
Built-in displayYes
Inlet hose length1.5 m
Outlet hose length1.5 m
Place settings13
Noise level49 dB
Number of washing programs5
Water consumption per cycle12 L
Energy efficiency classE
Power consumption (off)0.5 W
AC input voltage220-240 V
AC input frequency50 Hz
Depth600 mm
ColorSilver
Annual Water Consumption3360 L
Half Load OptionYes
Washing programsEco, Normal
Drying systemCondensation
Width60 cm
Height85 cm
Weight47.5 kg
Delay StartYes
Annual Energy Consumption266 kWh

Related product manuals