What to do if Smeg DFC612BK has water intake malfunction?
If your Smeg dishwasher experiences a water intake malfunction, first ensure that the water connections are correctly installed, the water intake tap is fully open, and the filter is not blocked. If the issue continues after checking these, contact the after-sales service for further assistance.
What to do if Smeg DFC612BK Dishwasher has water pump-out malfunction?
If the Smeg dishwasher experiences a water pump-out malfunction, check that the drain hose isn't kinked or crushed. Also, verify that the siphon and filter are not blocked. If the problem persists, contact the after-sales service.
What to do if Smeg Dishwasher has water heating malfunction?
In case of a water heating malfunction in your Smeg dishwasher, repeat the washing program. If the problem persists after repeating the program, contact the after-sales service.
What to do if Smeg DFC612BK Dishwasher shows safety level issue?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and switch off the appliance. Then, switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact the after-sales service.
What to do if Smeg Dishwasher has turbine flow-regulator malfunction?
If the turbine flow-regulator malfunctions in your Smeg dishwasher, interrupt the program and switch off the dishwasher. Switch it back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if Smeg DFC612BK has alternate washing system malfunction?
If your Smeg dishwasher experiences an alternate washing system malfunction, interrupt the program and switch off the appliance. Switch the dishwasher back on, program it again, and start the washing cycle. Should the issue continue, contact the after-sales service.
What to do if Smeg DFC612BK Dishwasher has water temperature monitoring malfunction?
If your Smeg dishwasher experiences a water temperature monitoring malfunction, interrupt the program and switch it off. Then, switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
Details the process for connecting the water supply to the dishwasher.
Instructions for connecting the dishwasher's drain hose securely.
Covers electrical connection requirements, plug safety, and precautions.
Procedure for replacing the fuse in the appliance's power cord.
Overview of the dishwasher's front control panel, buttons, and indicator lights.
Details the dishwasher's washing programs, selection, and starting procedures.
Guide on adjusting and using the water softening system based on water hardness.
Instructions for filling and adjusting rinse aid and detergent dispensers.
Recommendations for optimal dishwasher operation, loading, and dish safety.
Guidance on loading the lower dishwasher basket with dishes and cookware.
Instructions for properly arranging cutlery in the dishwasher basket.
Guidance on loading the upper dishwasher basket with smaller items.
General advice and warnings regarding the use of detergents and cleaning methods.
Procedure for periodic cleaning of the water intake filter to prevent clogging.
Instructions for removing and cleaning the upper, lower, and orbital spray arms.
Steps for inspecting and cleaning the central filter unit and micro-filter.
Recommendations for preparing the dishwasher for extended periods of non-use.
Guide to resolving common minor dishwasher issues and fault indicators.
General| Type | Freestanding |
|---|---|
| Place Settings | 12 |
| Noise Level | 49 dB |
| Delay Start | Yes |
| Half Load | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Color | Black |
| Programs | 5 |
To Next Page
