What to do if my Smeg DF614BE Dishwasher has a water pump-out malfunction?
If your Smeg Dishwasher experiences a water pump-out malfunction, verify that the drain hose isn't kinked or crushed, and ensure the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
What to do if my Smeg DF614BE Dishwasher has a water intake malfunction?
If your Smeg Dishwasher has a water intake malfunction, check that the water connections are correct, the water intake tap is turned on, and the filter is not fouled. If the issue persists, contact the after-sales service.
What to do if my Smeg DF614BE Dishwasher displays a safety level error?
If your Smeg Dishwasher shows a safety level error, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact the after-sales service.
What to do if my Smeg Dishwasher has a turbine flow-regulator malfunction?
If your Smeg Dishwasher experiences a turbine flow-regulator malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact the after-sales service.
What to do if my Smeg DF614BE has a water temperature monitoring malfunction?
If your Smeg Dishwasher experiences a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
Essential safety guidelines for appliance use, electrical safety, and handling.
Child safety, WEEE disposal, handling damaged/obsolete appliances, and solvent warnings.
Safety notes for Aquastop, sharp utensils, and unauthorized repairs.
Guidance on positioning, leveling, and specific installation constraints for built-in models.
Instructions for connecting the water intake and drain hoses to the appliance.
Requirements for electrical connection, plug compatibility, and cord safety.
Explains the function of each button and indicator light on the control panel.
Details wash programs, selection, starting, interrupting, changing, and annulling cycles.
Advice on half load, energy/detergent saving, and removing dishes.
Instructions for using, refilling, and adjusting the water softening system with salt.
Guidance on adding and adjusting detergent and rinse aid dispensers.
Best practices for loading baskets, and compatibility of dishware.
Procedures for cleaning filters, spray arms, and general upkeep.
Guides for identifying and resolving common operational issues.
Lists specific error codes (E1-E9) and their meanings for fault diagnosis.
General| Type | Freestanding |
|---|---|
| Capacity | 14 place settings |
| Width | 60 cm |
| Depth | 60 cm |
| Control Type | Electronic |
| Water Softener | Yes |
| Delay Start | Up to 24 hours |
| Half Load Option | Yes |
| Color | Black |
| Drying System | Natural Drying |
To Next Page
