User instructions
65
To remove the top spray arm, take off the retainer ring-nut. Wash it in a
jet of water and fit it into place correctly, checking that there are no
impediments of any kind preventing it from turning freely.
CLEANING THE FILTER UNIT
x The central filter C should be inspected regularly and cleaned if
necessary.
x To remove it, turn anti-clockwise and lift.
x Press the central filter D from below to extract it from the micro-filter.
x Separate the two parts of the plastic filter by pressing the body of
the filter in the zone shown by the arrows.
x Remove the central filter by lifting it.
To Next Page
Loading...
