Why is my Smeg DI6FABNE not taking in water?
If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
What to do if my Smeg DI6FABNE has a water pump-out malfunction?
If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
What to do if my Smeg DI6FABNE Dishwasher shows a safety level error?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
What to do if my Smeg DI6FABNE has water temperature monitoring malfunction?
If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if my Smeg dishwasher is not heating water?
If your Smeg dishwasher is not heating water, repeat the washing program. If the issue continues, contact the after-sales service.
General| Brand | Smeg |
|---|---|
| Model | DI6FABNE |
| Category | Dishwasher |
| Language | English |
To Next Page
