What to do if Smeg DI614H safety device tripped?
Interrupt the programme and switch off the Smeg Dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if my Smeg DI614H shows error E3?
If your Smeg Dishwasher displays error code E3, try repeating the wash program. If the problem remains after repeating the program, contact after-sales service for further assistance.
What to do if my Smeg Dishwasher displays error E4?
If your Smeg Dishwasher shows error code E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
What to do if my Smeg DI614H displays error E2?
If your Smeg Dishwasher shows error code E2 or E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
What to do if my Smeg DI614H Dishwasher shows error E5?
If your Smeg Dishwasher displays error E5, verify that the water connections are correctly installed and that the water intake tap is fully open. Also, inspect the filter to ensure it is clean and free from blockages. If the problem continues, contact after-sales service.
What to do if my Smeg DI614H Dishwasher shows error E6?
If your Smeg Dishwasher displays error code E6, first ensure that the drain hose isn't kinked or crushed. Also, check that the siphon and filter are not blocked. If the issue continues after these checks, contact after-sales service.
What to do if Smeg Dishwasher temperature sensor k.o.?
Interrupt the programme and switch off the Smeg Dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if Smeg DI614H litre counter k.o.?
Interrupt the programme and switch off the Smeg Dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if Smeg DI614H Dishwasher alternate washing failure?
Interrupt the programme and switch off the Smeg Dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
How to clean dishes properly in Smeg Dishwasher?
To ensure your dishes are cleaned properly in your Smeg Dishwasher, make sure you add the correct amount of detergent and that there is regenerating salt in the special container. Load the dishes correctly and select a program suitable for the dish types and their degree of soiling. Also, verify that all the filters are clean and correctly positioned, the spray arm nozzles are not obstructed, and there is no object blocking the rotation of the spray arms.
General| Type | Built-in |
|---|---|
| Size | Full-size |
| Place settings | 14 |
| Energy Rating | A++ |
| Energy efficiency class | A+ |
| Washing performance | A |
| Drying performance | A |
| Noise Level | 45 dB(A) |
| Drying System | Natural condenser drying |
| Delay start | Up to 9 hours |
| Half load | Yes |
| Dimensions (H x W x D) | 818 x 598 x 570 mm |
| Weight | 39 kg |
| Programs | Eco, Soak |
To Next Page
