What to do if Smeg is showing E2 error?
If your Smeg Dishwasher shows the E2 error, try opening and closing the dishwasher door and starting the appliance again. If the problem continues, call the authorized technical service center.
What to do if Smeg is showing E3 error?
If your Smeg Dishwasher is showing the E3 error, try opening and closing the dishwasher door and starting the appliance again. If the problem persists, call the authorized technical service center.
What to do if my Smeg Dishwasher shows error E6?
If your Smeg Dishwasher displays error code E6, first ensure that the drain hose isn't kinked or crushed. Also, check that the siphon and filter are not blocked. If the issue continues after these checks, contact after-sales service.
What to do if my Smeg Dishwasher shows error E5?
If your Smeg Dishwasher displays error E5, verify that the water connections are correctly installed and that the water intake tap is fully open. Also, inspect the filter to ensure it is clean and free from blockages. If the problem continues, contact after-sales service.
What to do if my Smeg displays error E4?
If your Smeg Dishwasher shows error code E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
What to do if my Smeg Dishwasher shows error E3?
If your Smeg Dishwasher displays error code E3, try repeating the wash program. If the problem remains after repeating the program, contact after-sales service for further assistance.
What to do if my Smeg displays error E2?
If your Smeg Dishwasher shows error code E2 or E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
What to do if my Smeg Dishwasher has water temperature monitoring malfunction?
If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
Why is my Smeg not taking in water?
If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
What to do if my Smeg Dishwasher shows error E1?
If your Smeg Dishwasher displays error code E1, it indicates an issue that requires professional attention. It is recommended to contact the after-sales service for assistance.
Covers general safety, installation by qualified technician, intended use, and name plate.
Addresses packaging disposal, earthing, detergent hazards, and appliance disposal (WEEE).
Details safety for Aquastop, internal lighting, and post-installation checks.
Covers positioning, stability, worktops, and leveling the appliance.
Details connecting the intake hose to cold or hot water supply, including filters.
Explains drain hose placement, height, diameter, and anti-submersion rules.
Covers voltage/frequency matching, plug/socket compliance, accessibility, and cord safety.
Provides instructions for replacing fuses in BS 1363A plugs for Great Britain.
Details the front panel controls, buttons, and indicator lights.
Explains the digital display and its indicators for program status and warnings.
Presents a table of washing programs, their load types, duration, and consumption.
Guides on starting, interrupting, changing, and stopping washing programs.
Explains how to set a delayed start for the washing program.
Details how to select and use various program options like ENERSAVE and Flexi Tabs.
Guides on water softening, hardness adjustment, and dispenser settings.
Instructions for adding detergent and rinse aid to their respective dispensers.
Provides advice on loading dishes, identifying dishwasher-safe items, and general usage.
Explains how to use the lower and upper baskets and their accessories.
Details how to adjust the height of the upper basket.
Covers general cleaning of outer surfaces, door gaskets, and avoiding abrasive detergents.
Instructions for cleaning the water intake filter and the spray arms.
Details cleaning the central filter unit and preparing the appliance for long periods of non-use.
Guides on checking common issues like program failure, water retention, and poor cleaning.
Explains the self-diagnostics system, fault codes (Er 01-09), and alarm reset procedures.
Provides technical specifications such as width, height, capacity, and water pressure.
General| Brand | Smeg |
|---|---|
| Model | Dishwasher |
| Category | Dishwasher |
| Language | English |
To Next Page
