EasyManua.ls Logo

Smeg DRY72C - Setting Drying Programs and Functions

Smeg DRY72C
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129316
- Insert the laundry into the drum (prior making
sure that the drum is empty).
- Close the dryer door.
- Select drying time
By turning the drying time selector, set the
preferred drying period, according to the type and
quantity of laundry and washing machine spin rpm
(see drying program chart). Selector jog may be
turned in both directions. Available time span is
from 15 min. to 140 minutes, LED (E) is ashing.
Final 10 minutes of the drying cycle is the cooling
period (the heater is off).
It is also possible to select the ventilation
program, lasting 20 minutes ( ). During this
program the heater is off.
- Selection of additional functions
Additional functions are selected prior pressing the
START button (D).
Decreasing the temperature
By pressing the button (B) the drying temperature
is decreased, the LED over button is on; this way,
however, the drying cycle is longer. It is therefore
recommended for only drying delicate laundry.
After the drying is completed, the function
returns to initial higher temperature.
Heater off
Turn the heater off by pressing button (C) (if you
wish to dry laundry at room temperature); LED
above button is on.
Operating the dryerOperating the dryer
11

Related product manuals