What to do if my Smeg D3T8SSA Dryer won't start?
If your Smeg Dryer won't start, there are a few things to check. First, ensure the dryer is properly plugged into the socket and that the loading door is fully closed. Make sure you've set a program and that the dryer isn't in Standby (Pause) mode. Finally, check if the child lock is active and, if so, deactivate it.
Why does my Smeg D3T8SSA Dryer program stop in the middle of the cycle?
If your Smeg Dryer program is interrupted unexpectedly, it could be due to a few reasons. Check that the loading door is properly closed. A power failure may have occurred; if so, press the Start/Pause key to resume the program. Also, the water tank might be full, so empty it.
Why is the water tank warning symbol on my Smeg D3T8SSA?
If the water tank warning symbol is illuminated or flashing on your Smeg dryer, it likely means the water tank is full; you should empty it. Additionally, if your dryer is connected directly to a water outlet, ensure the water discharge hose isn't bent, as this can also trigger the warning.
What does it mean when the filter cleaning and condenser warning symbol are flashing on my Smeg D3T8SSA Dryer?
If both the filter cleaning and condenser warning symbols are flashing on your Smeg Dryer, the filter seat might be clogged with lint. Clean the filter seat. Also, there might be a layer causing obstruction on the surface of the lint filter, so wash the filter with lukewarm water. Additionally, the condenser might be clogged, so ensure you clean the condenser as well.
What to do if my laundry is still damp after using my Smeg D3T8SSA Dryer?
If your laundry is damp after a drying cycle in your Smeg Dryer, several factors could be the cause. First, the program selected may not be suitable for the type of laundry you're drying, so check the care labels and select an appropriate program, potentially using time programs. A clogged lint filter or condenser can also cause this issue; clean them if necessary. Avoid overloading the dryer and ensure the laundry is sufficiently spun before drying. Note that laundry that comes out hot may still feel more humid.
Why do my clothes shrink in my Smeg D3T8SSA?
Clothes may shrink, felt, or deteriorate in your Smeg Dryer if the selected program isn't suitable for the type of laundry you're drying. Always check the care labels on your laundry items and choose a program accordingly.
What to do if my Smeg D3T8SSA loading door leaks water?
If water is leaking from the loading door of your Smeg Dryer, it's likely due to lint accumulated on the inner surfaces of the door and the gasket. Clean these surfaces to prevent leakage.
How to fix a Smeg D3T8SSA Dryer door that opens by itself?
If the loading door of your Smeg Dryer opens on its own, it probably isn't closed properly. Push the loading door until you hear it click shut.
What to do if my Smeg dryer program can not be started and filter warning led is blinking?
If your Smeg dryer program cannot be started and the filter warning LED is blinking, it could mean that the filter is not placed correctly; replace the filter. If the filter warning LED continues to blink even after the filter is placed, call technical service.
What to do if my Smeg D3T8SSA program can not be started and condenser warning led is blinking?
If your Smeg dryer program cannot be started and the condenser warning LED is blinking, it could mean that the condenser is not placed correctly; replace the condenser.
To Next Page
General
