Smeg DNP93SL - User Manual

34 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

DNP93SL / DN93SL

Dryer

User Manual

Asciugatrice

Manuale utente

2960313170_EN/ 05-09-22.(15:08)

Table of Contents

Questions and Answers

T
Tracy SpenceAug 17, 2025
Why does my Smeg DNP93SL Dryer take so long to dry?
- S
  Samuel CarterAug 18, 2025
  Several factors can cause extended drying times. The fibre filters (both interior and exterior) might be clogged, so wash them with warm water and dry. The condenser front side may be blocked, requiring cleaning. Ensure the ventilation grills aren't obstructed and that the room is adequately ventilated. A lime layer on the humidity sensor can also be a factor, so clean the sensor. Avoid overloading the dryer, and ensure laundry is adequately wrung before drying.
Z
zachary12Aug 20, 2025
What to do if clothes come out damp after drying in my Smeg Dryer?
- L
  Laura ChaseAug 20, 2025
  If your clothes are damp after drying, it could be due to several reasons. You might have used a program not suitable for the type of laundry you're drying; check the care labels and select an appropriate program. The fibre filters (interior and exterior) or the condenser might be clogged, so clean them. Avoid overloading the dryer and ensure your laundry is adequately wrung before drying.
S
Sandra SalinasAug 22, 2025
How to clean the fibre filter on Smeg Dryer?
- P
  Paul GrahamAug 22, 2025
  If the fibre filter cleaning icon is lit, the fibre filter (interior and exterior) may be unclean or clogged. Wash the filters with warm water and dry them. Ensure the filters are correctly inserted. If you're using an environmentally-friendly filter, make sure it's installed on the plastic part and placed on the filter housing, or replace the filter if needed.
J
Joan OwenAug 26, 2025
How to fix a Smeg DNP93SL Dryer that won't turn on?
- T
  thompsonjamesAug 26, 2025
  If your Smeg Dryer isn't turning on, first ensure the power cord is properly plugged in. Check that the loading door is fully closed. Verify that a program is selected and the dryer isn't in pause mode. Also, check if the child lock is activated and, if so, turn it off.
J
John RichardsonAug 28, 2025
What to do if Smeg Dryer program terminated prematurely?
- M
  Marcus PorterAug 28, 2025
  If your dryer program stops unexpectedly, make sure the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Also, check if the water tank is full and empty it if necessary.
M
Mary ChurchAug 31, 2025
Why is the water tank warning symbol flashing on my Smeg DNP93SL Dryer?
- J
  Jackson GreenAug 31, 2025
  If the water tank warning symbol is on or flashing, the water tank may be full; empty it. Also, if the product is connected directly to the water drain, check the water discharge hose for any collapses.
R
Robert AvilaSep 2, 2025
Why is the condenser warning icon flashing on my Smeg Dryer?
- B
  briannadavisSep 3, 2025
  If the condenser warning icon is flashing, the condenser front side may be clogged with fibres, so clean it. Also, ensure that the interior and exterior fibre filters are properly inserted.
E
Erin BakerSep 5, 2025
Why have clothes shrunk in my Smeg DNP93SL Dryer?
- B
  Brian YoungSep 5, 2025
  Clothes may shrink, harden, or spoil if a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a program suitable for the clothes.
M
mariathomasSep 8, 2025
Why is the WiFi icon flashing on my Smeg DNP93SL Dryer?
- K
  kimberly68Sep 8, 2025
  If the WiFi icon is flashing continuously, the dryer may not be connected to the wireless network. Follow the instructions to connect to the network. The device which the product utilizes to connect to network may be faulty, so check it.
P
Paul HouseSep 12, 2025
Why is water dripping from the Smeg DNP93SL loading door?
- A
  Alisha CarterSep 12, 2025
  If water drips from the loading door, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.

Smeg DNP93SL Specifications

General

Appliance placement	Freestanding
Drying system	Heat pump
Rated capacity	9 kg
Drying class	A
Noise level	64 dB
Energy efficiency class	A++
Remaining time indication	Yes
Delayed start	Yes
Product Type	Tumble Dryer
Child Lock	Yes
Reversible Door	Yes
Loading type	Front loading
Width	600 mm
Dimensions (H x W x D)	85 x 60 x 65 cm

Related product manuals

Preview: Smeg DNP92SEUK

Preview: Smeg DNP83SEES

Preview: Smeg DNP82SEIN

Preview: Smeg DN82SE

Preview: Smeg DN72CE

Preview: Smeg DT171IT

Preview: Smeg DHT81LUK

Preview: Smeg DRY72C-1

Preview: Smeg DHT81EIT

Preview: Smeg DHT71EIN