Smeg DT171IT - User Manual

Questions and Answers

J
Jason RichardsAug 7, 2025
Why does my Smeg Dryer take so long to dry?
- C
  Carly DeleonAug 7, 2025
  Several factors can cause a Smeg dryer to take longer than expected. The lint filter surface might be clogged, so wash it with lukewarm water. The heat exchanger could be clogged, requiring cleaning. Make sure the ventilation grills are open to prevent the room temperature from rising too much. A limescale layer on the humidity sensor can also extend drying time, so clean the sensor. Avoid overloading the dryer and ensure your laundry is sufficiently spun in the washing machine by selecting a higher spin speed.
D
Daniel RichardsAug 11, 2025
What to do if laundry is still damp after Smeg DT171IT Dryer cycle?
- J
  Jamie LeeAug 11, 2025
  If your laundry is coming out damp from your Smeg dryer, several factors could be at play. First, ensure the selected program is suitable for the type of laundry by checking the care labels and using time programs. A clogged lint filter or heat exchanger can also cause dampness, so wash the filter with lukewarm water and clean the heat exchanger. Avoid overloading the dryer, and make sure your laundry is adequately spun in the washing machine by selecting a higher spin speed.
W
whiteantonioAug 15, 2025
How to turn off the filter cleaning warning symbol on Smeg Dryer?
- M
  Mario JohnsonAug 15, 2025
  The filter cleaning warning symbol on your Smeg dryer indicates that the lint filter might be unclean. Clean the filter. Additionally, the filter seat might be clogged by lint, so clean the filter seat. There might also be a layer causing obstruction on the surface of the lint filter; wash the filter with lukewarm water.
L
Linda ReynoldsAug 19, 2025
Why is the water tank warning symbol on my Smeg DT171IT flashing?
- C
  Christine JacksonAug 19, 2025
  If the water tank warning symbol is flashing on your Smeg dryer, it likely means the water tank is full, so empty it. If the product is connected directly to the water outlet, check the water discharge hose to make sure it is not bent.
J
Jennifer FoxAug 25, 2025
What does it mean when the heat exchanger cleaning symbol is on in Smeg Dryer?
- M
  michael64Aug 25, 2025
  If the heat exchanger cleaning warning symbol is illuminated on your Smeg dryer, it indicates that the heat exchanger might be unclean. Clean the heat exchanger.
M
margaret89Aug 28, 2025
What to do if the filter and heat exchanger cleaning symbols are flashing on my Smeg DT171IT Dryer?
- C
  christinewareAug 28, 2025
  If both the filter and heat exchanger cleaning warning symbols are flashing on your Smeg dryer, it suggests a few possible issues. The filter seat might be clogged by lint, so clean the filter seat. There might be a layer causing obstruction on the surface of the lint filter, so wash the filter with lukewarm water. Also, the heat exchanger might be clogged, so clean the heat exchanger.
Z
Zachary NobleSep 1, 2025
Why can't I start the program on my Smeg DT171IT and the filter warning LED is blinking?
- P
  perezjosephSep 1, 2025
  If you cannot start the program on your Smeg dryer and the filter warning LED is blinking, it could be due to the filter not being placed correctly. Replace the filter. If the filter warning LED continues to blink even after the filter is placed correctly, call technical service.

Smeg DT171IT Specifications

General

Rated capacity	7 kg
Noise level	65 dB
Color	White
Remaining time indication	Yes
Anti-Crease function	Yes
Loading type	Front load
Drying programs	Shirts, Synthetics, Wool
Width	60 cm