Smeg DT282PIT User Manual (English)

Questions and Answers:

A
Amanda OrtizAug 6, 2025
Why does the Smeg Dryer take so long to dry?
- J
  James CastilloAug 7, 2025
  If your Smeg Dryer takes a long time to dry clothes, several factors could be the cause. The lint filter surface may be clogged, so wash it with lukewarm water. The heat exchanger might be clogged and require cleaning. Ensure the ventilation grills are open to prevent the room temperature from rising too much. Clean the humidity sensor if there's limescale buildup. Avoid overloading the dryer and select a higher spin speed on your washing machine to ensure laundry is sufficiently spun before drying.
L
Laurie PetersAug 11, 2025
How to fix the filter cleaning warning symbol on Smeg Dryer?
- R
  Robert GordonAug 11, 2025
  If the filter cleaning warning symbol is on for your Smeg Dryer, it indicates that the lint filter might be unclean. Clean the filter to resolve this. Additionally, the filter seat might be clogged by lint, so ensure you clean the filter seat as well. If there's a layer causing obstruction on the surface of the lint filter, wash the filter with lukewarm water.
J
Jessica RobertsAug 15, 2025
What to do if laundry is still damp after drying in Smeg DT282PIT?
- L
  Lauren PetersonAug 15, 2025
  If your laundry comes out damp at the end of the drying process in your Smeg Dryer, the selected programme may not be suitable for the type of laundry you're drying. Check the care labels on your laundry items and select a suitable programme, also consider using the time programmes. The lint filter or heat exchanger might be clogged, so wash the filter with lukewarm water and clean the heat exchanger. Avoid overloading the dryer, and ensure your laundry is sufficiently spun by selecting a higher spin speed on your washing machine.
M
Mary RamseyAug 19, 2025
How to turn off the heat exchanger cleaning warning symbol on a Smeg Dryer?
- L
  Lisa MackAug 19, 2025
  If the heat exchanger cleaning warning symbol is on for your Smeg Dryer, it means that the heat exchanger might be unclean. Clean the heat exchanger.
S
Stuart CarterAug 25, 2025
What to do if the water tank warning symbol is on in my Smeg Dryer?
- J
  jay23Aug 25, 2025
  If the water tank warning symbol is on or flashing on your Smeg Dryer, it likely means the water tank is full and needs to be emptied. Alternatively, if your dryer is connected directly to a water outlet, the water discharge hose might be bent, so check the hose.
A
Ariel MeyerAug 28, 2025
Why won't my Smeg DT282PIT Dryer turn on or start?
- Z
  Zachary WashingtonAug 28, 2025
  If your Smeg Dryer cannot be opened, the programme won't start, or the dryer doesn't activate, first ensure that the dryer is properly plugged into the socket and that the loading door is completely closed. Also, make sure that you have set a programme and that the dryer is not in Standby (Pause) mode. Check if the child lock is active and deactivate it if necessary. If there was a power failure, press the Start/Pause key to start the programme.
J
jfordSep 1, 2025
Why is my Smeg DT282PIT Dryer leaking water from the door?
- W
  William BarnesSep 1, 2025
  If you notice water leaking from the loading door of your Smeg Dryer, it's likely due to lint accumulated on the inner surfaces of the loading door and the gasket. Clean these surfaces to resolve the issue.

Smeg DT282PIT Specifications

General

Appliance placement	Freestanding
Loading type	Front load
Drying system	Heat pump
Rated capacity	8 kg
Drying class	A
Anti-Crease function	Yes
Noise level	65 dB
Energy efficiency class	A++
Width	595 mm
Type	Condenser
Number of programs	16
Color	White
Drying programs	Shirts, Synthetics, Wool
Height	850 mm