Smeg DT393PIT - User Manual

36 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Tumble Dryer / User Manual

EN

DT393PIT

Table of Contents

Questions and Answers

C
Charles IngramAug 13, 2025
What to do if my Smeg Dryer won't start?
- A
  Angela BernardAug 13, 2025
  If your Smeg Dryer isn't starting, there are a few things to check. First, make sure the dryer is properly plugged into the socket and that the loading door is fully closed. Ensure you've selected a program and that the dryer isn't in Standby (Pause) mode. Also, verify whether the Child lock is activated and, if so, deactivate it. In case of a power failure, press the Start/Pause key to resume the program.
D
dianagarciaAug 16, 2025
Why does my Smeg Dryer take so long to dry?
- J
  Jenna GainesAug 16, 2025
  A prolonged drying time in your Smeg Dryer can stem from several factors. The lint filter may be clogged; try washing it with lukewarm water. The heat exchanger could be obstructed, requiring cleaning. Ensure the room is well-ventilated by opening doors or windows to prevent overheating. A limescale buildup on the humidity sensor can also extend drying times, so clean the sensor. Avoid overloading the dryer, and ensure your laundry is adequately spun in the washing machine beforehand.
J
Jordan LittleAug 20, 2025
What to do if laundry is damp after drying in my Smeg DT393PIT?
- R
  Ryan MooreAug 20, 2025
  If your laundry is still damp after a drying cycle in your Smeg Dryer, several factors could be the cause. First, ensure that the selected program is appropriate for the type of laundry you're drying; check the care labels and use time programs if needed. A clogged lint filter or heat exchanger can also prevent proper drying, so wash the filter with lukewarm water and clean the heat exchanger. Overloading the dryer or insufficient spinning of the laundry before drying can also lead to damp clothes.
L
Latoya AllenAug 25, 2025
Why is the water tank warning symbol on my Smeg DT393PIT Dryer?
- K
  Kyle MartinezAug 25, 2025
  The water tank warning symbol on your Smeg Dryer indicates that the water tank is likely full; empty it. If your dryer is connected directly to a water outlet, check the water discharge hose for any bends or obstructions.
E
Evan AdamsAug 28, 2025
Why is the filter cleaning warning symbol on my Smeg Dryer?
- K
  kelli86Aug 28, 2025
  The filter cleaning warning symbol on your Smeg Dryer indicates that the lint filter is unclean. Clean the filter. The filter seat might also be clogged by lint, so clean the filter seat as well. If there is a layer causing obstruction on the surface of the lint filter, wash the filter with lukewarm water.
M
Mark ChenSep 1, 2025
Why is the heat exchanger cleaning warning symbol on my Smeg Dryer?
- M
  Melanie AdamsSep 1, 2025
  The heat exchanger cleaning warning symbol on your Smeg Dryer means that the heat exchanger is unclean. Clean the heat exchanger.
J
Jonathan Arias MDSep 4, 2025
Why is my Smeg DT393PIT Dryer leaking water from the loading door?
- K
  Kevin RussellSep 4, 2025
  If you notice water leaking from the loading door of your Smeg Dryer, it's likely due to lint accumulation on the inner surfaces of the door and the gasket. Clean these surfaces to resolve the issue.
M
millerkimberlySep 8, 2025
What causes the loading door on my Smeg DT393PIT to open by itself?
- A
  Alec WhiteSep 8, 2025
  If the loading door of your Smeg Dryer opens on its own, it probably isn't closed properly. Push the loading door until you hear it click shut.

Smeg DT393PIT Specifications

General

Capacity	9 kg
Energy rating	A++
Number of programs	16
Noise level	65 dB
Color	White

Related product manuals

Preview: Smeg DT383PIT

Preview: Smeg DT171IT

Preview: Smeg DT172IT

Preview: Smeg DT282PIT

Preview: Smeg DT292PIT

Preview: Smeg DR72IN

Preview: Smeg DRF81AUK

Preview: Smeg DHT71EUK

Preview: Smeg DHT83LIN

Preview: Smeg DHT71EIN

Preview: Smeg DNP83SEES