EasyManua.ls Logo

Smeg DNP83SLIN - User Manual

Smeg DNP83SLIN
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DNP83SLIN
Dryer
User Manual
Asciugatrice
Manuale utente
2960313602_EN/ 16-01-23.(13:04)

Table of Contents

Questions and Answers

  • S
    Sean SimmonsAug 19, 2025
    What to do if laundry is damp after drying in Smeg DNP83SLIN Dryer?
    • C
      Christopher Phillips DDSAug 20, 2025
      If your laundry is coming out damp from your Smeg Dryer, it might be due to a few reasons. First, ensure you're using the correct program for your laundry type by checking the care labels. You may also need to use additional time programs. Clogged fibre filters (interior and exterior) can also cause this issue, so wash them with warm water and dry them. Similarly, a clogged condenser front can prevent proper drying, so clean it. Avoid overloading the dryer, and make sure your laundry is spun at a higher speed in the washing machine to remove excess water beforehand.
  • J
    Jennifer WalkerAug 21, 2025
    What does the fibre filter cleaning icon on my Smeg Dryer mean?
    • T
      Tony StewartAug 21, 2025
      If the fibre filter cleaning icon is lit on your Smeg Dryer, it indicates that the fibre filters (interior and exterior) may be unclean. Wash the filters with warm water and dry them. It's also possible that a layer has formed in the filter pores, leading to clogging, so ensure they are thoroughly cleaned. Also, check that the fibre filters are correctly placed. Finally, if you're using an eco-friendly filter cloth, make sure it's installed on the plastic part and placed on the filter housing.
  • E
    Elizabeth DavidsonAug 25, 2025
    Why does my Smeg DNP83SLIN take so long to dry?
    • G
      Glenn PhillipsAug 25, 2025
      If your Smeg Dryer is taking longer than usual to dry clothes, several factors could be at play. The fibre filters (both interior and exterior) might be clogged, so wash them with warm water and let them dry. The front of the condenser could also be blocked; clean it to ensure proper airflow. Check that the ventilation grills aren't obstructed, and ensure the room has adequate ventilation by opening a door or window. Limescale buildup on the humidity sensor can also extend drying times, so clean the sensor. Avoid overloading the machine, and ensure your laundry is spun at a higher speed in the washing machine to remove excess water before drying.
  • T
    Thomas WilkinsAug 26, 2025
    What does the water tank warning symbol on my Smeg Dryer mean?
    • S
      Samantha RomeroAug 26, 2025
      If the water tank warning symbol is on or flashing on your Smeg Dryer, the water tank may be full; empty it. Also, if your dryer is connected directly to a water discharge, check the hose for any folds or kinks that might be blocking the flow.
  • A
    Amy MejiaAug 28, 2025
    How to fix a Smeg DNP83SLIN that won't turn on?
    • R
      Richard AlexanderAug 28, 2025
      If your Smeg Dryer isn't turning on or the program won't start, check a few things. First, make sure the power plug is securely plugged in. Ensure that the loading door is completely closed. Verify that you've set the program correctly and that it's not in standby mode. Also, check if the child lock is activated and, if so, turn it off.
  • D
    Dustin MitchellAug 29, 2025
    What to do if Smeg Dryer program was interrupted for no reason?
    • N
      Nicholas Stephenson DDSAug 29, 2025
      If your Smeg Dryer program stops unexpectedly, a few things could be happening. Ensure that the loading door is properly closed. There might have been a power outage; if so, press the Start / Standby / Cancel button to restart the program. The water tank might also be full; empty it to resume the drying cycle.
  • J
    Jason PetersAug 31, 2025
    Why did my clothes shrink in the Smeg DNP83SLIN Dryer?
    • S
      spencerstevenAug 31, 2025
      If your laundry shrunk, matted, or spoiled after drying in your Smeg Dryer, it's likely that you didn't use the correct program for the type of laundry. Always check the care labels on your laundry and select a program that's suitable for the fabric type.
  • A
    Amanda PorterSep 2, 2025
    Why is water leaking from the Smeg Dryer loading door?
    • T
      Tiffany BushSep 3, 2025
      If you notice water flowing from the loading door of your Smeg Dryer, it's possible that fibres have accumulated on the inner surfaces of the loading door and the loading door gasket. Clean these surfaces to resolve the issue.
  • R
    ryan37Sep 4, 2025
    Why does the Smeg DNP83SLIN door open by itself?
    • S
      Steven JamesSep 4, 2025
      If the loading door of your Smeg Dryer is opening by itself, it's likely that it's not being closed properly. Push the loading door until you hear the closing sound to ensure it's securely shut.
  • B
    Brent PowellSep 7, 2025
    Why isn't the light inside my Smeg DNP83SLIN Dryer turning on?
    • A
      Andrew GomezSep 7, 2025
      If the lighting inside your Smeg drying machine isn't working (for models with lamps), first check that the machine is turned on using the On/Off button. If it's on and the light still doesn't work, the lamp might be broken. Contact an Authorized Service to replace the lamp.

Smeg DNP83SLIN Specifications

General IconGeneral
Capacity8 kg
Energy Efficiency ClassA+++
Noise Level65 dB
Drying Programs16
ColorSilver
TypeHeat Pump

Related product manuals