Why is my Smeg DWA6214X2 Dishwasher not taking in water?
If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
What to do if my Smeg dishwasher has a water pump-out malfunction?
If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
What to do if my Smeg dishwasher shows a safety level error?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
What to do if my Smeg Dishwasher has water temperature monitoring malfunction?
If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if my Smeg dishwasher is not heating water?
If your Smeg dishwasher is not heating water, repeat the washing program. If the issue continues, contact the after-sales service.
Connects the dishwasher to the water supply, specifying cold/hot water usage.
Details how to connect the drain hose to a drain pipe or sink.
Explains the buttons and indicators on the dishwasher's front panel.
Details the different washing programs, their progress, and consumption.
Covers selecting additional options and delaying program start times.
Explains the use of Flexi Tabs and the child lock feature.
Guides on adjusting and refilling the water softening system and salt.
Explains how to use the rinse aid and detergent dispensers.
Offers advice on dish types, loading, and general usage precautions.
Provides detailed instructions on how to load the lower and upper baskets.
Advises on cleaning agents, outer surfaces, and general maintenance.
Instructions for cleaning the water intake filter.
Details how to remove and clean the upper, lower, and orbital spray arms.
Guides on inspecting and cleaning the centre and micro-filters.
Provides checks for common issues like program failure or poor cleaning.
Explains error codes (E1-E9) and their corresponding malfunctions.
General| Type | Freestanding |
|---|---|
| Capacity | 14 place settings |
| Noise Level | 49 dB |
| Depth | 60 cm |
| Color | Stainless steel |
| Appliance Placement | Freestanding |
| Control Panel Colour | Stainless steel |
| Drying System | Natural condenser drying |
| Delayed Start Timer | Yes |
| Delay Start (max) | 24 hours |
| AquaStop Function | Yes |
| Half Load | Yes |
| Width | 598 mm |
| Washing Programs | Eco, Intensive, Normal, Quick, Soak |
To Next Page
