Why is my Smeg dishwasher not taking in water?
If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
What to do if my Smeg dishwasher has a water pump-out malfunction?
If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
What to do if my Smeg DWAI149 shows a safety level error?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
What to do if my Smeg DWAI149 has water temperature monitoring malfunction?
If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
General| Brand | Smeg |
|---|---|
| Model | DWAI149 |
| Category | Dishwasher |
| Language | English |
Covers crucial safety advice before using the appliance, installation requirements, and handling packaging.
Highlights dangers of detergents, safe disposal of obsolete appliances, and WEEE directive compliance.
Warns against using solvents, leaning on the door, drinking residues, and improper loading.
Guidance on positioning the dishwasher, ensuring stability, and avoiding heat sources.
Details on connecting the water intake hose to the water supply and the drain hose.
Guidance on connecting the appliance to the mains power supply and safety measures.
Instructions for replacing the fuse in the BS 1363A 13amp fused plug.
Details the buttons and indicator lights on the front control panel for operation.
Explains features like Flexi Tabs, Hyclean, Half Load Wash, and Program Delay.
Details various wash programs, their load capacity, duration, and consumption.
Explains how to switch on, program, select, and start washing cycles.
Details how to interrupt, change, or annul a running washing program.
Describes how to activate and deactivate washing options like Flexi Tabs.
Explains Hyclean, Spread Half Load, and Program Delay options in detail.
Provides advice on energy saving, detergent consumption, and environmental protection.
Instructions on how to unload dishes after the wash cycle for best results.
Guide on using and refilling the water softening system with regenerating salt.
Instructions on how to adjust the water hardness setting of the appliance.
Table showing water hardness levels and guide to rinse aid/detergent dispensers.
Steps to refill rinse aid and adjust the dispenser for optimal drying.
Instructions on how to add detergent and notes on detergent types.
Recommendations for loading dishes correctly into the dishwasher for optimal results.
Tips for securely placing dishes and avoiding damage or obstruction.
List of materials and items that should not be washed in the dishwasher.
Guide to using the lower and bottom basket inserts for efficient loading.
Specific instructions for loading plates, pots, pans, and cutlery into the lower basket.
Recommendations for loading glasses, small plates, and cups into the upper basket.
Details of optional accessories for baskets, such as cup supports and cutlery racks.
Instructions for adjusting the upper basket height (Versions A and B).
General advice on cleaning the dishwasher, avoiding abrasive detergents.
Steps to clean the water intake filter located at the tap connection.
How to remove, clean, and reinstall spray arms and clean the filter unit.
Important advice for filter cleaning and proper maintenance procedures.
Steps to take before leaving the dishwasher unused for an extended period.
Checklist for restarting the dishwasher after a period of inactivity.
Guidance on diagnosing and resolving minor operational problems.
Checks to perform if the dishwasher program does not start.
Troubleshooting water retention and poor cleaning results.
Tips for drying, streaks, stains, and rust marks inside the tank.
Explanation of fault codes indicated by illuminated lights and their meanings.
Troubleshooting Acquastop, safety level, and water heating issues (E1-E4).
Troubleshooting water intake and pump-out malfunctions (E5, E6).
Resolving turbine flow-regulator and alternate washing system issues (E7, E8).
Addressing water intake system malfunctions indicated by error E9.
To Next Page
