TABLE OF PROGRAMS
SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most
appropriate program according to dish type and degree of soiling.
After using the table to identify the most appropriate washing program:
• press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;
• keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired
program illuminates;
• close the door; the machine will automatically begin the washing program after the sounding of the acoustic
device.
DURATION CONSUMPTION
PROGRAMME,
NUMBER & SYMBOL
LOAD
CROCKERY AND CUTLERY
PROGRAM
PROGRESS
MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
1
SOAK
Pans and dishes awaiting a further
wash
Cold prewash
8' 4
_
2
DELICATE
Wash immediately after use for
dishes with light dirt
Wash at 45°C
Cold rinse
Ri nse at 67°C
Dry
60' 13 1,10
3
BIO (*)
EN 50242
Wash immediately after use for
dishes wi th nor mal dirt
Wash at 55°C
Cold rinse
Ri nse at 67°C
Dry
110' 15 1,24
4
NORMAL Dishes with normal dirt
Cold prewash
Wash at 65°C
Cold rinse
Ri nse at 67°C
Dry
100' 18 1,40
5
INTENSIVE
Very dirty pans and dishes (exc ept
delicate items)
Prewash at 45°C
Wash at 67°C
2 cold rinses
Ri nse at 70°C
Dry
110' 22 1,65
Only run the soak program with half loads.
The HALF LOAD option (6) is available for all programs
except the soak program.
(*) Reference program as EN 50242 standard.
(
–
) Not present.
(1) Average power consumption with the softener set on
level 2.
(2) The cycle duration and power consumption may vary
according to the water and room temperatures, and
the type and amount of dishes.
The washing cycle will not take place if the
dishwasher door is left open or not properly
closed.
For any other information about use and
maintenance of the dishwasher, read the
enclosed manual carefully.
19 592 0022 00
To Next Page
Loading...
Need help?
General
