EasyManuals Logo

Smeg DWI612C User Manual

Smeg DWI612C
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
User instructions
29
3.2 Washing programs
Before starting a washing program make sure that:
The water supply tap is
open.
The
correct amount of detergent
has been added to the
dispenser
.
The baskets have been
correctly loaded.
The spray arms are able to
rotate freely
and without obstruction.
The dishwasher door is
securely closed
.
HALF LOAD WASH SETTING (certain models only)
This function is especially suitable for loads up to
6 place settings
and allows saving of water and
electricity. It is controlled by the
HALF LOAD
button
(6)
and allows washing in the upper basket
only.
IMPORTANT:
at the end of the program remember
to deactivate the function
to ensure the next
wash is not also carried out in half load mode
by mistake
.
A cutlery basket can be placed in the
upper basket
, while the
lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
Always try to run the dishwasher
fully loaded
.
Do not wash the dishes in running water.
Use the washing program that is
most appropriate
for each type of load.
Do not carry out any preliminary rinsing.
If available, connect the dishwasher to a hot water supply up to 60°C.
When possible,
disable the drying cycle
and leave the door open at the end of the washing
cycle: the residual air and heat will dry the dishes perfectly.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the environment. To avoid
using excessive amounts of detergent and to save on electricity, observe the following:
separate
the more delicate items from dishes that are more resistant to aggressive detergents
and high temperatures;
do not pour
the detergent directly on the dishes.
REMOVING THE DISHES
At the end of the washing program, wait at least
20 minutes
before removing the dishes, to allow
them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in
the lower basket, it is
advisable
to unload the lower basket first, and then the upper basket.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg DWI612C and is the answer not in the manual?

Smeg DWI612C Specifications

General IconGeneral
BrandSmeg
ModelDWI612C
CategoryDishwasher
LanguageEnglish

Related product manuals