EN - 17
EN
During the descaling cycle, the
machine will make a few pauses to
allow the descaler to act effectively
Wait for the end of the cycle.
• The descaling cycle ends when the button
(14) turns white.
• Remove the tank (7) and rinse it under
running water to remove any traces of
descaler.
• Re-mount the tank and ll it up to “MAX”
with clean water to perform the rinse cycle,
then press the key (14) to start this cycle.
The button (14) ashes.
• The rinse cycle ends when the key (14) lights
up with a xed white light.
• Re-position the lever (15) in the vertical
position. The machine is ready for use
again.
Personal injury hazard.
• The descaler contains acids that
can irritate the skin and eyes.
• Follow the manufacturer's
instructions and safety warnings
on the packet scrupulously in
the event of contact with skin or
eyes.
• Use descaler products
recommended by Smeg to
prevent damage to the coffee
machine.
Cleaning and maintenance
To Next Page
Loading...
