EasyManua.ls Logo

Smeg FD43PHNF2 - Before Calling Your after Sales Service

Smeg FD43PHNF2
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UK - 12 -
PART- 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
What to do if your refrigerator does not operate;
Check that;
There is no power ,
The general switch in your home is disconnected ,
The thermostat setting is on « position ,
The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
You have not overloaded the appliance ,
The doors are closed perfectly ,
There is no dust on the condenser ,
There is enough place at the rear and side walls.
IIf your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) Noise:
During automatic defrosting.
When the appliance is cooled or warmed (due to expansion of appliance material).
Heard when the thermostat switches the compressor on/off.
Compressor noise
Normal motor noise. This noise means that the compressor operates normally
Compressor may cause more noise for a short time when it is activated.
Bubbling noise and splash:
This noise is caused by the flow of the refrigerant in the tubes of the system.
Water flow noise:
Normal flow noise of water flowing to the evaporation container during defrosting.
This noise can be heard during defrosting.
Air Blow Noise:
Normal fan noise. This noise can be heard in No-Frost fridge during normal operation
of the system due to the circulation of air.

Related product manuals