UK - 8 -
Crisper
Partition Crisper
ce nt er
Cavity
Nail
Nail
Cr isper cover
REMOVING THE CRISPER COVER
First Step : Removing the crispers
• It is easy to pull out the crisper because
of the crisper has rollers.
• Pull the crisper out as far as possible
and pull the front part up and out
Second Step: Taking out the partition
crisper center between the crispers.
•BendthePartitiontowardleftfromthe
bottom of the part
• Take out the Partition crisper
Third Step: Taking out the crisper cover
• Pull out the crisper cover until the nails
of the cover come on the cavities (right
and left side) of the cabinet.
• When the nails comes into the cavities
pull up and take out the crisper cover
NOTE: Make the inverse of the same operation for the resetting the crisper cover.
All written and visual descriptions in the accessories
may vary according to the appliance model.
To Next Page
Loading...
